Air Taxi Skyport Location Problem for Airport Access

Witnessing the rapid progress and accelerated commercialization made in recent years for the introduction of air taxi services in near future across metropolitan cities, our research focuses on one of the most important consideration for such services, i.e., infrastructure planning (also known as skyports). We consider design of skyport locations for air taxis accessing airports, where we present the skyport location problem as a modified single-allocation p-hub median location problem integrating choice-constrained user mode choice behavior into the decision process. Our approach focuses on two alternative objectives i.e., maximizing air taxi ridership and maximizing air taxi revenue. The proposed models in the study incorporate trade-offs between trip length and trip cost based on mode choice behavior of travelers to determine optimal choices of skyports in an urban city. We examine the sensitivity of skyport locations based on two objectives, three air taxi pricing strategies, and varying transfer times at skyports. A case study of New York City is conducted considering a network of 149 taxi zones and 3 airports with over 20 million for-hire-vehicles trip data to the airports to discuss insights around the choice of skyport locations in the city, and demand allocation to different skyports under various parameter settings. Results suggest that a minimum of 9 skyports located between Manhattan, Queens and Brooklyn can adequately accommodate the airport access travel needs and are sufficiently stable against transfer time increases. Findings from this study can help air taxi providers strategize infrastructure design options and investment decisions based on skyport location choices.Comment: 25 page

Effects of daily herbage allowance and stage of lactation on the intake and performance of dairy cows in early summer

peer-reviewedThis research was part-funded by European Union Structural Funds (EAGGF).The aim of this study was to investigate the relationship between daily herbage allowance (DHA) and the performance of dairy cows at two stages of lactation. Spring-calving (n=42, mean calving date 17 February) and autumn-calving (n=42, mean calving date 22 September) Friesian cows were divided into three equal groups and assigned to three levels of DHA (above a cutting height of 35 mm), 17 (L), 20 (M) and 23 (H) kg of dry matter (DM) per head, from late April to late June, 1996. The spring-calving cows grazed to sward heights (mm) of 47, 56 and 65 (s.e. 0.6) and residual herbage organic matter (OM) masses (above 35 mm) of 294, 408 and 528 (s.e. 12.1) kg/ha for L, M and H, respectively. The autumn-calving cows grazed to corresponding sward heights of 51, 60 and 69 (s.e. 1.1) mm and leftresidual herbage OM masses of 364, 445 and 555 (s.e. 12.9) kg/ha for L, M and H, respectively. Pastures were mechanically topped post grazing. Spring-calving cows consumed 13.3, 14.7 and 15.5 kg OM (s.e. 0.47) per day, and autumn-calving cows consumed 13.3, 13.8 and 14.9 kg OM (s.e. 0.43) per day for L, M and H, respectively. Mean daily solids-corrected milk yield was 23.1, 23.8 and 24.8 (s.e. 0.34) kg for the spring-calving cows, and 17.5, 18.4 and 18.7 (s.e. 0.35) kg for the autumncalving cows, for L, M and H, respectively. Milk yield could be predicted from preexperimental yield (PMY) and daily herbage organic matter allowance (DOMA, kg) according to the following equation: y = −1.13 + 0.76 (s.e. 0.030) PMY + 0.22 (s.e. 0.057) DOMA (r.s.d. 1.32, R2 0.89). The results indicate that high individual cow and herd production levels can be achieved from high quality herbage alone during early summer at a DHA of 23 kg DM for spring-calving cows and 20 kg DM for autumn-calving cows.European Unio

Process for purification of silicon

The purification of metallurgically pure silicon having a silicon content of more than 95% by weight is accomplished by leaching with an acidic solution which substantially does not attack silicon. A mechanical treatment leading to continuous particle size reduction of the granulated silicon to be purified is combined with the chemical purification step

Process for purification of solids

A process for purifying solids, especially silicon, by melting and subsequent resolidification, is described. Silicon used in solar cell manufacturing is processed more efficiently and cost effectively

Si3N4 single-crystal nanowires grown from silicon micro and nanoparticles near the threshold of passive oxidation

A simple and most promising oxide-assisted catalyst-free method is used to prepare silicon nitride nanowires that give rise to high yield in a short time. After a brief analysis of the state of the art, we reveal the crucial role played by the oxygen partial pressure: when oxygen partial pressure is slightly below the threshold of passive oxidation, a high yield inhibiting the formation of any silica layer covering the nanowires occurs and thanks to the synthesis temperature one can control nanowire dimensions